WE ARE CURRENTLY UPDATING OUR RAYTECH WEBSITES - SORRY FOR ANY INCONVENIENCE. TO PLACE AN ORDER, PLEASE CONTACT OUR CUSTOMER SERVICE TEAM AT 800-243-7163.
Product Categories

FAQ

Laps

Q: Is there a break in required for the Nubond lap?

A: In some instances, yes. Please refer to the instructions for any break in and maintenance.

Q: Is there a break in required for the Dimafast Lap?

A: No.

Q: How do I best maintain my Dimafast Lap?

A: When finished, clean with soap & water and thoroughly dry before storage. When in use, be sure not to stay in one spot on the lap, use it completely.

What is the recommended RPM for the laps?

A: 1000 RPM.



Does the Lap Storage Container fit the Raytech Spin Disc Rack?

A: No, the Storage Container is thicker than the slots in the Spin Disc Rack.

How do I choose between the Fast Lap, Tin Lap or Copper Lap?

A: This is personal preference. In general, the Copper Lap is best for charging with diamond. The Fast Lap and Tin Lap are universally used for polishing.

How do I maintain my blade for optimum use?

A: Operate at recommended speeds and lapidary oil coolant will provide longer life over water.

Is there a recommended RPM range for the Blazer Blades?

4.5" – 5000 RPM
6" – 3300 RPM
8" – 1750 RPM
12" – 1200 RPM 20" – 24" – 900 RPM

Will the Dressing Block work with other blades in addition to the Blazer Blades?

A: Yes, this will work with all blades.

Will the Dressing Block affect the kerf of my blade?

A: No, it will only sharpen the blade, however over dressing could result in partial diamond loss.

How many times can I use the Dressing Block before I need to replace it?

A: This can be used until there is no more to cut.

Can you describe the different applications of Raycool & Lapidary Oil? I am not sure which is more suited to my needs.

A: Raycool is a water additive, primarily used for trimming. Lapidary Oils are better for hard materials and giving longer life.

Will the Rayspray Coolant System work on other models?

A: Yes.

Can I use Lapidary Saw Oil in the Rayspray Coolant System?

A: No, use only with water or water with Raycool additive.

How do I properly dispose of Lapidary Saw Oil?

A: The same as automobile type oils.

Can I reuse Lapidary Saw Oil?

A: Yes.

Can I use Raycool in the Rayspray Coolant System?

A: Yes, when mixed with water.

How do I properly dispose of Raycool?

A: Raycool can be poured down the drain.

Can I reuse Raycool?

A: No.